1095 steel is high carbon steel , and it is popular in knife and sword blades. As with other steels, the first two digits represent the primary components in its composition.
AISI 1095 high carbon steel plate, where 1 stands for carbon and 0 stands for the absence of other central elements in its composition. The last two digits represent the carbon content, which is 0.95%. A carbon content of less than 1% makes 1095 a high carbon steel plate rather than a tool steel. Generally, tool steel has a carbon content of more than 1%. 1095 carbon steel plate contains mainly carbon and manganese.
In addition to carbon, the other element in 1095 steel is manganese, making it a basic steel. It has a high hardness and recommended wear resistance.AISI 1095 carbon steel plate is sometimes referred to as spring steel and is typically used for applications involving continuous stress.
C: Increases the edge retention, hardness and tensile strength. It also improves steel resistance to wear, abrasion and corrosion.
Mn: Increases Hardness and brittleness.
P: Improves machinability and hardness.
S: Improves machinability.
1095 steel has managed to remain on the knife-making scene because it makes good blades for knives. The steel is easy to work on, in addition to good toughness, good edge retention, and ease of sharpening.
AISI 1095 high carbon steel plate is the most widely used 10 series steel. Its carbon content is 0.95%-1.03%. After heat treatment, AISI 1095 high-carbon steel plate can reach a hardness between HRC 57-60 and has very good toughness, but is not resistant to rust. For knives, 1095 is a very "standard" carbon steel, with good performance and low cost, with the right toughness and polish. It is mostly used in traditional European style hunting knives, large machetes and military knives.
|Product name||AISI 1095 High Carbon Steel Plate|
|Standard||ASTM EN DIN GB ISO JIS BA ANSI|
HIC, SSC, SPWHT, Macrostructure, detection of defects, Hardness and DWTT test and EN10204/3.3 certification are also available
bending, welding, decoiling, cutting, punching
5000 tons / month
7-15 working days after the receipt of 30% deposit
30%T/T Advance + 70% Balance
FOB, CFR, CIF, EXW
water proof paper + metal pallet + angle bar protection + steel belt or as required
|*If you do not find what you are
looking for, please call us now. If you have found it, we are happy to
answer any questions or concerns you may have about stainless steel
grades and assist you through the purchasing process.|
Hanhuang Steel manufacturer has more than 20 years of production experience, 25,000 square meters of production workshop, and the stock of commonly used steel products reaches 50,000 tons.